**Unit Converter** ▶ **Pressure Converter** ▶ Convert Bar to Megapascal

**Adblocker Detected**

**Uh Oh! It seems you’re using an Ad blocker!**

Since we’ve struggled a lot to makes online calculations for you, we are appealing to you to grant us by disabling the Ad blocker for this domain.

Conversions between bar and megapascals (mpa) become quite easy if you know the idea about the conversion factor for these units of pressure. Also, you can try these conversions with the assistance of our tool. An online bar to megapascal converter lets you turn the number of given bars into the equivalent megapascals (mpa). Even the tool uses the standard formula for changing the value of the bar into the megapascals.

Look at the below-mentioned example (bars to mpa) for a better understating of conversions between these units of volume. But, first, let’s elaborate the basic definitions of both these units:

Bar simply abbreviated as bar that is a metric unit, but still not approved by the SI unit of pressure. Exactly it is equal to 100,000 Pa and even slightly lower than the current average atmospheric pressure on Earth, at sea level.

Megapascal abbreviated as mpa or MN/m2, or N/mm2, it is referred to as the SI derived unit of pressure that typically used to quantify internal pressure, stress, Young’s modulus & ultimate tensile strength.

Read on!

- 1 bar is equal to 0.1 megapascals (map)
- 1 megapascal (mpa) is equal to 10 bars

The formula is:

MPa = bar ÷ 10

Convert with:

- Online bar to megapascal converter
- Formula (the below example helps you)

Problem: Convert 10 bar to megapascal?

Solution:

Step 1 (Formula):

- MPa = bar ÷ 10

Step 2 (Put the Values):

- MPa = 227 ÷ 10

Step 3 (Result):

- 22.7 megapascals

Means, 227 bars is equal to 22.7 megapascals